1U Tilt Vesa Monitor Mount

The VMMRMVM-100 VESA monitor mount enables easy installation of VESA 100x100 mm Mounting hole pattern Monitors into 19” EIA equipment Racks. An adapter can be used to Mount 75x75 mm hole pattern monitors. EIA equipment Racks can be two post or four post and the monitors can be of any size. The VMMRMVM-100 is made of heavy guage powder coated welded steel and features easily adjustable friction nuts on each side. The adjustment allows for setting the Monitor viewing angle and also allows the Monitor to be tilted out of the way to access any equipment which may be mounted behind the monitor. The VMMRMVM-100 occupies 1U (1.75”) of vertical Rack space and may be mounted so the monitor tilts in the up or down direction. Mounting the monitor to tilt in the down direction allows monitors with limited vertical viewing angles to be mounted higher in the rack then tilted down to allow for optimal viewing. If stationary equipment is installed in the rack (does not slide in/out) the VMMRMVM-100 can be mounted directly over the mounting holes on the stationary equipment and thus it occupies no vertical Rack space.

Product Features

Associated Items