|
|
|
You Are Here:: Shop By Category | CAT5 Extenders | Cat5 HDMI Extender | Shinybow SB-6353T/R KIT HDMI HDBaseT™ Wall Plate Transmitter w/PoH Receiver up to 330 Feet (100M) – (Single LAN, 2-Way IR, RS-232, HDMI)
|
|
|
Shinybow SB-6353T/R KIT HDMI HDBaseT™ Wall Plate Transmitter w/PoH Receiver up to 330 Feet (100M) – (Single LAN, 2-Way IR, RS-232, HDMI)
0
0 customer reviews.
Description :
The SB-6353T/R KIT contains both the SB-6353R HDMI, HDBaseT™ Receiver w/ PoH and the SB-6353T HDMI, HDBaseT™ Wall Plate Transmitter w/ PoH.
The SB-6353R is a HDMI over HDBaseT™ with PoH (Power Over HDBaseT™) 48VDC output receiver. This HDBaseT™ receiver can receive the HDMI, IR remote in & out, RS-232 in & out, Ethernet signals and output PoH 48DC power over HDBaseT™ to a HDBaseT™ transmitter via a single category cable for long distances up to 928 feet (100M). The SB-6353R uses CAT6/6a/7 (UTP or FTP) category cable with RJ-45 8P8C connectors and supports the 568a or 568b color specification table. This HDBaseT™ receiver product provides higher full HD HDMI resolutions of 480i/p, 720p,1080i/p quality that is identical to the source to the HD destination display. The SB-6353R control signals are useful in receiving the HDMI digital video, digital multi-channel audio signals, IR in/out, RS-232 in/out, Ethernet series interface via a category cable from the HDBaseT™ Transmitter.
The SB-6353T HDBaseT™ Transmitter can transmit HDMI, Ethernet, PoH power (48VDC) from the Receiver, IR Remote input to the Receiver or output to the destination and the RS-232 interface signal I/O to the HDBaseT™ Receiver (SB-6353R PoH) via single LAN (category) cable for long distances of up to 328 feet (100M) maximum. The SB-6353T Transmitter uses a single UTP/FTP (category cable) CAT5e, CAT6, CAT6a or CAT7 via a RJ-45 8P8C female socket (Supports 568a/b). This product provides higher full HD HDMI 1.4a with supported resolutions of 480i/p, 720p,1080i/p or High 4K2K quality that is identical to the high quality full HDMI 1.4 source signals. This Transmitter is useful for sending the HDMI digital video / multi-channel audio format, IR remote in or out, Ethernet, RS-232 in/out and PoH signals via a single category cable transmitting to the HDBaseT™ Receiver.
Item Number: #SB-6353T/R KIT
|
|
Product Features
- SB-6353R Receiver
- HDBaseT™ RX with 3D, 4K2K over a single UTP/STP cable up to 330ft (100M)
- Supports HDMI 1080p@60 video V1.4a 3D and Ultra HD 4K2K video, CEC / HDCP compliant
- Supports link speeds for TMDS Video format max 10.2Gbit/s, 340MHz signal Deep Color, Full HD 1080p@60Hz@24/36/48bit/pixels
- Supports 1080p TV’s at 24/30/60/100/200/240Hz and above as well as Blu-rays at 24FPS
- Supports Digital Audio 7.1 LPCM 192KHz, 24bits, Full HD Dolby TrueHD and DTS-HD Master Audio uncompressed HD audio formats
- Supports PoH power DC48V over HDBaseT™ (Power supports 48VDC to the transmitter)
- Transfers Bi-directional infrared control signals together with the HDMI signal
- RS-232 port for firmware updates or RS-232 to control signal transmission
- Supports HDMI CEC between your connected source and display gear
- LED indicators to show the HDCP/LINK/POWER/POE status
- HDBaseT™ transfers HDMI, PoE, LAN, RS-232 and Bi-Directional IR over a single category cable
- Supports Super Audio CD (DSD), CEC commands protocol table
- Mounting ears and wall mount pack supplied
- Power supply using universal power switch 48VDC, 50/60Hz, 100~240VAC
SB-6353T Transmitter
- HDBaseT™ TX 3D, 4K2K over a single UTP/STP cable up to 330ft (100M)
- Supports HDMI 1080p@60 video V1.4a 3D and Ultra HD 4K2K video, CEC / HDCP compliant
- Supports link speeds for TMDS video format for a max 10.2Gbit/s, Signal 340MHz Deep Color, Full HD 1080p@60Hz@24/36/48bit/pixels
- Supports 1080p TV’s at 24/30/60/100/200/240Hz and above as well as Blu-rays at 24FPS
- Supports Digital Audio 7.1 LPCM 192KHz, 24bits, Full HD Dolby TrueHD and DTS-HD Master Audio uncompressed HD audio formats
- Supports PoH power over HDBaseT™ (Power support 48VDC from HDBaseT™ Receiver SB-6353R)
- Transfers Bi-directional Infrared control signals together with the HDMI signal
- RS-232 port for firmware updates or RS-232 control signal transmission
- Supports HDMI CEC between your connected source and display gear with LED indicators to show the POWER/HDMI/HDCP/LINK status
- HDBaseT™ transfers HDMI, PoE, LAN, RS-232 and Bi-Directional IR over a single category cable
- Supports Super Audio CD (DSD), CEC commands protocol table
Specifications
|
Type of Extender
|
HDBaseT™ RX & TX HDMI signal over category UTP/STP Cable
|
|
Input Signals
|
HDMI with Digital Video (TMDS)/Audio 0.5~1.0Vpp, DDC 5Vpp
|
|
HDBaseT™ Support
|
HDMI 1.4a HDMI format standard, DVI and HDCP Compliant
|
|
Video Supported
|
HDMI and DVI TMDS format for 1920x1200 resolutions up to 10.2Gbps (340MHz), Digital RGB 48bits/px, deep color, 3D
|
|
Category Cable Support
|
CAT6, CAT6a, CAT7 UTP/FTP cable
|
|
Supported HDMI Resolutions
|
480p, 720p 1080i/1080p and Ultra HD 4K2K
|
|
Scan Rate Accepted
|
Supports HDMI full HD resolutions; Frequency 24Hz to 240Hz
|
|
Control
|
(1) IR in, (1) IR out, (1) RS-232 I/O and (1) LAN series interface
|
|
PoH Supported
|
HDBaseT™ Receiver supports 48VDC power to the transmitter (SB-6353T)
|
|
Transfer Distance
|
Up to 330ft (100M)
|
|
HDMI I/O Connectors
|
HDMI Type A - SMD 19pin female type
|
|
HDBaseT™ I/O Connectors
|
HDBaseT™ RJ-45, 8p8c female socket
|
|
Safety Approvals
|
CE, FCC, VCCI, REACH
|
|
Dimensions (LxWxH)
|
Receiver: 5.31 x 5.11 x 1 in (135x130x26mm) / Transmitter: 4.33 x 4.73 x 1.38 in (110x120x35mm)
|
|
Rack Mount
|
Use total of 10 pcs installs into one 19 inch rack mount
|
|
Weight
|
Receiver: 1.1 lb (Unit only) / 2.9 lb (Net) / Transmitter: 0.9 lb (Unit only) / 1.3 lb (Net)
|
|
Power Consumption
|
- Receiver: Max 1750mA (Full load 1080p-60Hz signal with use DC48V input)
- Transmitter: Max 1000mA (Full load 1080p-60Hz signal with use DC48V input)
|
|
Power Supply
|
Receiver: Power Input +48VDC, 1A (Universal Type 50/60Hz, 100~240VAC)
|
|
|
|
|
